Metal Fabrication & Steel Services
Detailing, cutting, forming, rolling, consulting and supply, coordinated by one team so your steel package arrives complete, documented and on time.
Or call (949) 200-3797
Fiber Laser Cutting
High-power 20 kW fiber laser cutting for sheet and plate, from one-off prototypes to production runs.
20 kW
Press Brake Bending
Precision shearing and CNC bending up to 26 ft long and 1 in. thick for channels, trim and brackets.
26 ft × 1 in.
Custom Roll Forming
Tooling design, prototyping and high-volume production of C, Z, U, hat and sigma profiles.
20 ga to ¼ in.
Tube & Pipe Bending
Pipe, tube and profiles rolled into arcs, quarter and half circles, plus tube bending, cutting and mitering.
Arcs, half circles & rings
Heavy Plate Rolling
Cylinders, cones and segments rolled up to 16 ft in diameter and ¾ in. thick.
16 ft dia. × ¾ in.
Plasma & Oxy-Fuel Cutting
Thick-plate cutting with high surface quality for base plates, flanges, lugs and heavy brackets.
Weld-prep bevels
Project Consulting
Material selection, value engineering, coating strategy and delivery planning, before costs get locked in.
Takeoffs & BOMs
Steel Detailing
Shop drawings, erection drawings, anchor bolt plans and CNC files, prepared from your contract drawings.
Shop & erection drawings
Project Steel Supply
Structural, sheet, plate, tube and fabricated parts on one PO, with MTRs and phased job-site delivery.
MTRs · phased delivery
How it works
From drawing to delivery, in four steps.
Step 1: Tell us what you need
Drawings, a BOM, a sample or a sketch. We will ask the right questions.
Step 2: Review & quote
We check manufacturability, suggest savings and send a clear quote.
Step 3: Source & fabricate
Material is sourced to spec, then cut, formed, rolled and coated.
Step 4: Deliver & document
Tagged, bundled and delivered with MTRs and packing lists.
Shop capacity
| Process | Capacity | Scope |
|---|---|---|
| Fiber Laser Cutting | 20 kWFiber laser source · Carbon, stainless, aluminum | Carbon steel, stainless steel, aluminum, galvanized and pre-coated sheet |
| Press Brake Bending | 26 ftSingle-piece bend length · Up to 1 in. thick | Hot-rolled, cold-rolled, galvanized, stainless and aluminum |
| Heavy Plate Rolling | 16 ftPlate rolling diameter · Up to ¾ in. thick | Cylinders, cones, half-shells and segments |
| Custom Roll Forming | ¼ in.Max roll-forming thickness · 20 gauge to ¼ in. | C-channels, C and Z purlins, U-channels, hat/omega, sigma and custom open sections |
Request a quote
Send us the drawing, or the cut list.
We take DXF, DWG and STEP files, dimensioned PDFs and bills of material. Our estimating team reviews every request and comes back with an itemized quote.
- DXF
- DWG
- STEP
- XLS/CSV